1998 Chrysler PT Cruiser vs. 1992 Holden Statesman
To start off, 1998 Chrysler PT Cruiser is newer by 6 year(s). Which means there will be less support and parts availability for 1992 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1992 Holden Statesman would be higher. At 4,987 cc (8 cylinders), 1992 Holden Statesman is equipped with a bigger engine. In terms of performance, 1992 Holden Statesman (242 HP @ 4600 RPM) has 92 more horse power than 1998 Chrysler PT Cruiser. (150 HP @ 5500 RPM) In normal driving conditions, 1992 Holden Statesman should accelerate faster than 1998 Chrysler PT Cruiser. With that said, vehicle weight also plays an important factor in acceleration. 1992 Holden Statesman weights approximately 197 kg more than 1998 Chrysler PT Cruiser. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1992 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1998 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Holden Statesman (401 Nm @ 3800 RPM) has 181 more torque (in Nm) than 1998 Chrysler PT Cruiser. (220 Nm @ 4000 RPM). This means 1992 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1998 Chrysler PT Cruiser. 1992 Holden Statesman has automatic transmission and 1998 Chrysler PT Cruiser has manual transmission. 1998 Chrysler PT Cruiser will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1998 Chrysler PT Cruiser | 1992 Holden Statesman | |
| Make | Chrysler | Holden |
| Model | PT Cruiser | Statesman |
| Year Released | 1998 | 1992 |
| Engine Position | Front | Front |
| Engine Size | 2429 cc | 4987 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 150 HP | 242 HP |
| Engine RPM | 5500 RPM | 4600 RPM |
| Torque | 220 Nm | 401 Nm |
| Torque RPM | 4000 RPM | 3800 RPM |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1418 kg | 1615 kg |
| Vehicle Length | 4290 mm | 4970 mm |
| Vehicle Width | 1710 mm | 1820 mm |
| Vehicle Height | 1610 mm | 1430 mm |
| Wheelbase Size | 2620 mm | 2830 mm |
