1998 Dodge Viper vs. 1957 Rover P4
To start off, 1998 Dodge Viper is newer by 41 year(s). Which means there will be less support and parts availability for 1957 Rover P4. In addition, the cost of maintenance, including insurance, on 1957 Rover P4 would be higher. At 8,001 cc (10 cylinders), 1998 Dodge Viper is equipped with a bigger engine. In terms of performance, 1998 Dodge Viper (450 HP) has 380 more horse power than 1957 Rover P4. (70 HP). In normal driving conditions, 1998 Dodge Viper should accelerate faster than 1957 Rover P4. With that said, vehicle weight also plays an important factor in acceleration. 1957 Rover P4 weights approximately 343 kg more than 1998 Dodge Viper.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Dodge Viper (664 Nm) has 511 more torque (in Nm) than 1957 Rover P4. (153 Nm). This means 1998 Dodge Viper will have an easier job in driving up hills or pulling heavy equipment than 1957 Rover P4.
Compare all specifications:
1998 Dodge Viper | 1957 Rover P4 | |
Make | Dodge | Rover |
Model | Viper | P4 |
Year Released | 1998 | 1957 |
Engine Position | Front | Front |
Engine Size | 8001 cc | 2230 cc |
Engine Cylinders | 10 cylinders | 6 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 450 HP | 70 HP |
Torque | 664 Nm | 153 Nm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1057 kg | 1400 kg |
Vehicle Length | 4490 mm | 4540 mm |
Vehicle Width | 1930 mm | 1680 mm |
Vehicle Height | 1200 mm | 1630 mm |
Wheelbase Size | 2450 mm | 2830 mm |
Fuel Tank Capacity | 49 L | 45 L |