1998 Fiat Seicento vs. 2000 Rolls-Royce Park Ward
To start off, 2000 Rolls-Royce Park Ward is newer by 2 year(s). Which means there will be less support and parts availability for 1998 Fiat Seicento. In addition, the cost of maintenance, including insurance, on 1998 Fiat Seicento would be higher. At 5,379 cc (12 cylinders), 2000 Rolls-Royce Park Ward is equipped with a bigger engine. In terms of performance, 2000 Rolls-Royce Park Ward (322 HP @ 5000 RPM) has 284 more horse power than 1998 Fiat Seicento. (38 HP @ 5500 RPM) In normal driving conditions, 2000 Rolls-Royce Park Ward should accelerate faster than 1998 Fiat Seicento. With that said, vehicle weight also plays an important factor in acceleration. 2000 Rolls-Royce Park Ward weights approximately 1720 kg more than 1998 Fiat Seicento. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2000 Rolls-Royce Park Ward is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 Rolls-Royce Park Ward. However, in wet, icy, snow, or gravel driving conditions, 1998 Fiat Seicento, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Rolls-Royce Park Ward (499 Nm @ 3900 RPM) has 434 more torque (in Nm) than 1998 Fiat Seicento. (65 Nm @ 3000 RPM). This means 2000 Rolls-Royce Park Ward will have an easier job in driving up hills or pulling heavy equipment than 1998 Fiat Seicento. 2000 Rolls-Royce Park Ward has automatic transmission and 1998 Fiat Seicento has manual transmission. 1998 Fiat Seicento will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Rolls-Royce Park Ward will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1998 Fiat Seicento | 2000 Rolls-Royce Park Ward | |
| Make | Fiat | Rolls-Royce |
| Model | Seicento | Park Ward |
| Year Released | 1998 | 2000 |
| Body Type | Hatchback | Sedan |
| Engine Position | Front | Front |
| Engine Size | 899 cc | 5379 cc |
| Engine Cylinders | 4 cylinders | 12 cylinders |
| Engine Type | in-line | V |
| Horse Power | 38 HP | 322 HP |
| Engine RPM | 5500 RPM | 5000 RPM |
| Torque | 65 Nm | 499 Nm |
| Torque RPM | 3000 RPM | 3900 RPM |
| Engine Compression Ratio | 9.0:1 | 10.0:1 |
| Top Speed | 140 km/hour | 245 km/hour |
| Acceleration 0-100mph | 18 seconds | 7.8 seconds |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 3 doors | 4 doors |
| Vehicle Weight | 730 kg | 2450 kg |
| Vehicle Length | 3330 mm | 5650 mm |
| Vehicle Width | 1510 mm | 1940 mm |
| Vehicle Height | 1450 mm | 1520 mm |
| Wheelbase Size | 2210 mm | 3360 mm |
| Fuel Tank Capacity | 35 L | 100 L |
