1998 Ford Contour vs. 1961 Ginetta G3
To start off, 1998 Ford Contour is newer by 37 year(s). Which means there will be less support and parts availability for 1961 Ginetta G3. In addition, the cost of maintenance, including insurance, on 1961 Ginetta G3 would be higher. At 1,989 cc (4 cylinders), 1998 Ford Contour is equipped with a bigger engine. In terms of performance, 1998 Ford Contour (135 HP @ 6000 RPM) has 96 more horse power than 1961 Ginetta G3. (39 HP @ 5000 RPM). In normal driving conditions, 1998 Ford Contour should accelerate faster than 1961 Ginetta G3. With that said, vehicle weight also plays an important factor in acceleration. 1998 Ford Contour weights approximately 607 kg more than 1961 Ginetta G3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1961 Ginetta G3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1961 Ginetta G3. However, in wet, icy, snow, or gravel driving conditions, 1998 Ford Contour, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1998 Ford Contour | 1961 Ginetta G3 | |
Make | Ford | Ginetta |
Model | Contour | G3 |
Year Released | 1998 | 1961 |
Engine Position | Front | Front |
Engine Size | 1989 cc | 997 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 135 HP | 39 HP |
Engine RPM | 6000 RPM | 5000 RPM |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1242 kg | 635 kg |
Vehicle Length | 4680 mm | 3820 mm |
Vehicle Width | 1760 mm | 1400 mm |
Wheelbase Size | 2710 mm | 2290 mm |