1998 Ford Contour vs. 1990 Honda Integra

To start off, 1998 Ford Contour is newer by 8 year(s). Which means there will be less support and parts availability for 1990 Honda Integra. In addition, the cost of maintenance, including insurance, on 1990 Honda Integra would be higher. At 2,544 cc (6 cylinders), 1998 Ford Contour is equipped with a bigger engine. In terms of performance, 1998 Ford Contour (195 HP @ 6625 RPM) has 89 more horse power than 1990 Honda Integra. (106 HP @ 6300 RPM). In normal driving conditions, 1998 Ford Contour should accelerate faster than 1990 Honda Integra. With that said, vehicle weight also plays an important factor in acceleration. 1998 Ford Contour weights approximately 401 kg more than 1990 Honda Integra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Ford Contour (224 Nm @ 5625 RPM) has 90 more torque (in Nm) than 1990 Honda Integra. (134 Nm @ 4500 RPM). This means 1998 Ford Contour will have an easier job in driving up hills or pulling heavy equipment than 1990 Honda Integra.

Compare all specifications:

1998 Ford Contour 1990 Honda Integra
Make Ford Honda
Model Contour Integra
Year Released 1998 1990
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 2544 cc 1595 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Horse Power 195 HP 106 HP
Engine RPM 6625 RPM 6300 RPM
Torque 224 Nm 134 Nm
Torque RPM 5625 RPM 4500 RPM
Engine Compression Ratio 10.0:1 9.0:1
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1411 kg 1010 kg
Vehicle Height 1390 mm 1330 mm
Wheelbase Size 2730 mm 2560 mm