1998 Lancia Kappa vs. 1980 Mitsubishi Sigma
To start off, 1998 Lancia Kappa is newer by 18 year(s). Which means there will be less support and parts availability for 1980 Mitsubishi Sigma. In addition, the cost of maintenance, including insurance, on 1980 Mitsubishi Sigma would be higher. At 1,994 cc (4 cylinders), 1998 Lancia Kappa is equipped with a bigger engine. In terms of performance, 1998 Lancia Kappa (202 HP @ 5600 RPM) has 127 more horse power than 1980 Mitsubishi Sigma. (75 HP @ 4800 RPM). In normal driving conditions, 1998 Lancia Kappa should accelerate faster than 1980 Mitsubishi Sigma. With that said, vehicle weight also plays an important factor in acceleration. 1998 Lancia Kappa weights approximately 520 kg more than 1980 Mitsubishi Sigma. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Mitsubishi Sigma is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Mitsubishi Sigma. However, in wet, icy, snow, or gravel driving conditions, 1998 Lancia Kappa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Lancia Kappa (298 Nm @ 2750 RPM) has 181 more torque (in Nm) than 1980 Mitsubishi Sigma. (117 Nm @ 3200 RPM). This means 1998 Lancia Kappa will have an easier job in driving up hills or pulling heavy equipment than 1980 Mitsubishi Sigma. 1980 Mitsubishi Sigma has automatic transmission and 1998 Lancia Kappa has manual transmission. 1998 Lancia Kappa will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Mitsubishi Sigma will be easier to drive especially in heavy traffic.
Compare all specifications:
1998 Lancia Kappa | 1980 Mitsubishi Sigma | |
Make | Lancia | Mitsubishi |
Model | Kappa | Sigma |
Year Released | 1998 | 1980 |
Engine Position | Front | Front |
Engine Size | 1994 cc | 1597 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 202 HP | 75 HP |
Engine RPM | 5600 RPM | 4800 RPM |
Torque | 298 Nm | 117 Nm |
Torque RPM | 2750 RPM | 3200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1550 kg | 1030 kg |
Vehicle Length | 4700 mm | 4460 mm |
Vehicle Width | 1840 mm | 1660 mm |
Vehicle Height | 1470 mm | 1370 mm |
Wheelbase Size | 2710 mm | 2520 mm |