1998 Lancia Kappa vs. 2000 Toyota Mark II
To start off, 2000 Toyota Mark II is newer by 2 year(s). Which means there will be less support and parts availability for 1998 Lancia Kappa. In addition, the cost of maintenance, including insurance, on 1998 Lancia Kappa would be higher. At 1,988 cc (6 cylinders), 2000 Toyota Mark II is equipped with a bigger engine. In terms of performance, 1998 Lancia Kappa (217 HP @ 6000 RPM) has 61 more horse power than 2000 Toyota Mark II. (156 HP @ 6200 RPM). In normal driving conditions, 1998 Lancia Kappa should accelerate faster than 2000 Toyota Mark II. With that said, vehicle weight also plays an important factor in acceleration. 1998 Lancia Kappa weights approximately 45 kg more than 2000 Toyota Mark II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2000 Toyota Mark II is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 Toyota Mark II. However, in wet, icy, snow, or gravel driving conditions, 1998 Lancia Kappa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Lancia Kappa (309 Nm @ 2750 RPM) has 109 more torque (in Nm) than 2000 Toyota Mark II. (200 Nm @ 4400 RPM). This means 1998 Lancia Kappa will have an easier job in driving up hills or pulling heavy equipment than 2000 Toyota Mark II. 2000 Toyota Mark II has automatic transmission and 1998 Lancia Kappa has manual transmission. 1998 Lancia Kappa will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Toyota Mark II will be easier to drive especially in heavy traffic.
Compare all specifications:
1998 Lancia Kappa | 2000 Toyota Mark II | |
Make | Lancia | Toyota |
Model | Kappa | Mark II |
Year Released | 1998 | 2000 |
Engine Position | Front | Front |
Engine Size | 1928 cc | 1988 cc |
Engine Cylinders | 5 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 217 HP | 156 HP |
Engine RPM | 6000 RPM | 6200 RPM |
Torque | 309 Nm | 200 Nm |
Torque RPM | 2750 RPM | 4400 RPM |
Engine Bore Size | 82 mm | 75 mm |
Engine Stroke Size | 75.7 mm | 75 mm |
Engine Compression Ratio | 8.5:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1455 kg | 1410 kg |
Vehicle Length | 4570 mm | 4780 mm |
Vehicle Width | 1840 mm | 1770 mm |
Vehicle Height | 1430 mm | 1480 mm |
Wheelbase Size | 2710 mm | 2810 mm |