1998 Lancia Kappa vs. 2013 Chevrolet Camaro

To start off, 2013 Chevrolet Camaro is newer by 15 year(s). Which means there will be less support and parts availability for 1998 Lancia Kappa. In addition, the cost of maintenance, including insurance, on 1998 Lancia Kappa would be higher. At 6,200 cc (8 cylinders), 2013 Chevrolet Camaro is equipped with a bigger engine. In terms of performance, 2013 Chevrolet Camaro (420 HP @ 5900 RPM) has 219 more horse power than 1998 Lancia Kappa. (201 HP @ 6300 RPM) In normal driving conditions, 2013 Chevrolet Camaro should accelerate faster than 1998 Lancia Kappa.

Because 2013 Chevrolet Camaro is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 Chevrolet Camaro. However, in wet, icy, snow, or gravel driving conditions, 1998 Lancia Kappa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chevrolet Camaro (569 Nm @ 4600 RPM) has 299 more torque (in Nm) than 1998 Lancia Kappa. (270 Nm @ 4500 RPM). This means 2013 Chevrolet Camaro will have an easier job in driving up hills or pulling heavy equipment than 1998 Lancia Kappa.

Compare all specifications:

1998 Lancia Kappa 2013 Chevrolet Camaro
Make Lancia Chevrolet
Model Kappa Camaro
Year Released 1998 2013
Body Type Coupe Convertible
Engine Position Front Front
Engine Size 2959 cc 6200 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type V V
Valves per Cylinder 4 valves 2 valves
Horse Power 201 HP 420 HP
Engine RPM 6300 RPM 5900 RPM
Torque 270 Nm 569 Nm
Torque RPM 4500 RPM 4600 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual 6-speed manual
Number of Seats 4 seats 4 seats
Vehicle Length 4570 mm 4836 mm
Vehicle Width 1840 mm 1918 mm
Vehicle Height 1430 mm 1377 mm
Wheelbase Size 2710 mm 2852 mm