1998 Mazda 323 vs. 1980 Mercedes-Benz 280
To start off, 1998 Mazda 323 is newer by 18 year(s). Which means there will be less support and parts availability for 1980 Mercedes-Benz 280. In addition, the cost of maintenance, including insurance, on 1980 Mercedes-Benz 280 would be higher. At 2,746 cc (6 cylinders), 1980 Mercedes-Benz 280 is equipped with a bigger engine. In terms of performance, 1980 Mercedes-Benz 280 (185 HP @ 6000 RPM) has 71 more horse power than 1998 Mazda 323. (114 HP @ 6000 RPM) In normal driving conditions, 1980 Mercedes-Benz 280 should accelerate faster than 1998 Mazda 323. With that said, vehicle weight also plays an important factor in acceleration. 1980 Mercedes-Benz 280 weights approximately 372 kg more than 1998 Mazda 323. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Mercedes-Benz 280 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Mercedes-Benz 280. However, in wet, icy, snow, or gravel driving conditions, 1998 Mazda 323, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Mercedes-Benz 280 (240 Nm @ 4500 RPM) has 78 more torque (in Nm) than 1998 Mazda 323. (162 Nm @ 4000 RPM). This means 1980 Mercedes-Benz 280 will have an easier job in driving up hills or pulling heavy equipment than 1998 Mazda 323. 1998 Mazda 323 has automatic transmission and 1980 Mercedes-Benz 280 has manual transmission. 1980 Mercedes-Benz 280 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Mazda 323 will be easier to drive especially in heavy traffic.
Compare all specifications:
1998 Mazda 323 | 1980 Mercedes-Benz 280 | |
Make | Mazda | Mercedes-Benz |
Model | 323 | 280 |
Year Released | 1998 | 1980 |
Engine Position | Front | Front |
Engine Size | 1840 cc | 2746 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 114 HP | 185 HP |
Engine RPM | 6000 RPM | 6000 RPM |
Torque | 162 Nm | 240 Nm |
Torque RPM | 4000 RPM | 4500 RPM |
Engine Bore Size | 83 mm | 86 mm |
Engine Stroke Size | 85 mm | 78.8 mm |
Engine Compression Ratio | 9.7:1 | 9.0:1 |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1128 kg | 1500 kg |
Vehicle Length | 4320 mm | 4400 mm |
Vehicle Width | 1710 mm | 1800 mm |
Vehicle Height | 1420 mm | 1310 mm |
Wheelbase Size | 2520 mm | 2460 mm |