1999 Alfa Romeo 145 vs. 1999 MCC Smart

To start off, both 1999 Alfa Romeo 145 and 1999 MCC Smart were released in the same year (1999). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,370 cc (4 cylinders), 1999 Alfa Romeo 145 is equipped with a bigger engine. In terms of performance, 1999 Alfa Romeo 145 (102 HP @ 6300 RPM) has 49 more horse power than 1999 MCC Smart. (53 HP @ 5250 RPM). In normal driving conditions, 1999 Alfa Romeo 145 should accelerate faster than 1999 MCC Smart. With that said, vehicle weight also plays an important factor in acceleration. 1999 Alfa Romeo 145 weights approximately 578 kg more than 1999 MCC Smart. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1999 MCC Smart is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1999 MCC Smart. However, in wet, icy, snow, or gravel driving conditions, 1999 Alfa Romeo 145, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 Alfa Romeo 145 (125 Nm @ 4600 RPM) has 45 more torque (in Nm) than 1999 MCC Smart. (80 Nm @ 2000 RPM). This means 1999 Alfa Romeo 145 will have an easier job in driving up hills or pulling heavy equipment than 1999 MCC Smart. 1999 MCC Smart has automatic transmission and 1999 Alfa Romeo 145 has manual transmission. 1999 Alfa Romeo 145 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 MCC Smart will be easier to drive especially in heavy traffic.

Compare all specifications:

1999 Alfa Romeo 145 1999 MCC Smart
Make Alfa Romeo MCC
Model 145 Smart
Year Released 1999 1999
Engine Position Front Rear
Engine Size 1370 cc 599 cc
Engine Cylinders 4 cylinders 3 cylinders
Engine Type in-line in-line
Horse Power 102 HP 53 HP
Engine RPM 6300 RPM 5250 RPM
Torque 125 Nm 80 Nm
Torque RPM 4600 RPM 2000 RPM
Engine Bore Size 82 mm 63.5 mm
Engine Stroke Size 64.9 mm 63 mm
Engine Compression Ratio 10.5:1 9.5:1
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 2 seats
Number of Doors 3 doors 2 doors
Vehicle Weight 1278 kg 700 kg
Vehicle Length 4100 mm 3230 mm
Vehicle Width 1720 mm 1610 mm
Vehicle Height 1440 mm 1180 mm
Wheelbase Size 2600 mm 2280 mm