1999 BMW M28i vs. 2011 Fiat Panda
To start off, 2011 Fiat Panda is newer by 12 year(s). Which means there will be less support and parts availability for 1999 BMW M28i. In addition, the cost of maintenance, including insurance, on 1999 BMW M28i would be higher. At 3,201 cc (6 cylinders), 1999 BMW M28i is equipped with a bigger engine. In terms of performance, 1999 BMW M28i (250 HP @ 7400 RPM) has 191 more horse power than 2011 Fiat Panda. (59 HP @ 5000 RPM). In normal driving conditions, 1999 BMW M28i should accelerate faster than 2011 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1999 BMW M28i weights approximately 747 kg more than 2011 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1999 BMW M28i is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1999 BMW M28i. However, in wet, icy, snow, or gravel driving conditions, 2011 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 BMW M28i (355 Nm) has 253 more torque (in Nm) than 2011 Fiat Panda. (102 Nm). This means 1999 BMW M28i will have an easier job in driving up hills or pulling heavy equipment than 2011 Fiat Panda. 2011 Fiat Panda has automatic transmission and 1999 BMW M28i has manual transmission. 1999 BMW M28i will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Fiat Panda will be easier to drive especially in heavy traffic.
Compare all specifications:
1999 BMW M28i | 2011 Fiat Panda | |
Make | BMW | Fiat |
Model | M28i | Panda |
Year Released | 1999 | 2011 |
Engine Position | Front | Front |
Engine Size | 3201 cc | 1242 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 250 HP | 59 HP |
Engine RPM | 7400 RPM | 5000 RPM |
Torque | 355 Nm | 102 Nm |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1700 kg | 953 kg |
Vehicle Length | 4780 mm | 3540 mm |
Vehicle Width | 1810 mm | 1600 mm |
Vehicle Height | 1440 mm | 1580 mm |
Wheelbase Size | 2840 mm | 2310 mm |