1999 Chrysler Viper vs. 1953 GAZ M-20

To start off, 1999 Chrysler Viper is newer by 46 year(s). Which means there will be less support and parts availability for 1953 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1953 GAZ M-20 would be higher. At 7,986 cc (10 cylinders), 1999 Chrysler Viper is equipped with a bigger engine. In terms of performance, 1999 Chrysler Viper (389 HP @ 5150 RPM) has 338 more horse power than 1953 GAZ M-20. (51 HP @ 3600 RPM). In normal driving conditions, 1999 Chrysler Viper should accelerate faster than 1953 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 1999 Chrysler Viper weights approximately 130 kg more than 1953 GAZ M-20. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 Chrysler Viper (620 Nm @ 3600 RPM) has 495 more torque (in Nm) than 1953 GAZ M-20. (125 Nm @ 2200 RPM). This means 1999 Chrysler Viper will have an easier job in driving up hills or pulling heavy equipment than 1953 GAZ M-20.

Compare all specifications:

1999 Chrysler Viper 1953 GAZ M-20
Make Chrysler GAZ
Model Viper M-20
Year Released 1999 1953
Engine Size 7986 cc 2119 cc
Engine Cylinders 10 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 389 HP 51 HP
Engine RPM 5150 RPM 3600 RPM
Torque 620 Nm 125 Nm
Torque RPM 3600 RPM 2200 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1590 kg 1460 kg
Vehicle Length 4460 mm 4670 mm
Vehicle Width 1930 mm 1900 mm
Vehicle Height 1130 mm 1650 mm
Wheelbase Size 2450 mm 2710 mm