1999 Daihatsu Charade vs. 1985 Holden Gemini
To start off, 1999 Daihatsu Charade is newer by 14 year(s). Which means there will be less support and parts availability for 1985 Holden Gemini. In addition, the cost of maintenance, including insurance, on 1985 Holden Gemini would be higher. At 1,471 cc (4 cylinders), 1985 Holden Gemini is equipped with a bigger engine. In terms of performance, 1999 Daihatsu Charade (83 HP @ 6500 RPM) has 11 more horse power than 1985 Holden Gemini. (72 HP @ 5600 RPM). In normal driving conditions, 1999 Daihatsu Charade should accelerate faster than 1985 Holden Gemini. With that said, vehicle weight also plays an important factor in acceleration. 1985 Holden Gemini weights approximately 15 kg more than 1999 Daihatsu Charade.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Holden Gemini (116 Nm @ 3600 RPM) has 11 more torque (in Nm) than 1999 Daihatsu Charade. (105 Nm @ 5000 RPM). This means 1985 Holden Gemini will have an easier job in driving up hills or pulling heavy equipment than 1999 Daihatsu Charade.
Compare all specifications:
| 1999 Daihatsu Charade | 1985 Holden Gemini | |
| Make | Daihatsu | Holden |
| Model | Charade | Gemini |
| Year Released | 1999 | 1985 |
| Engine Position | Front | Front |
| Engine Size | 1296 cc | 1471 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 83 HP | 72 HP |
| Engine RPM | 6500 RPM | 5600 RPM |
| Torque | 105 Nm | 116 Nm |
| Torque RPM | 5000 RPM | 3600 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Front |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 845 kg | 860 kg |
| Vehicle Length | 3790 mm | 4040 mm |
| Vehicle Width | 1630 mm | 1610 mm |
| Vehicle Height | 1400 mm | 1380 mm |
| Wheelbase Size | 2400 mm | 2410 mm |
