1999 Daihatsu Charade vs. 2003 Fiat Punto
To start off, 2003 Fiat Punto is newer by 4 year(s). Which means there will be less support and parts availability for 1999 Daihatsu Charade. In addition, the cost of maintenance, including insurance, on 1999 Daihatsu Charade would be higher. At 1,901 cc (4 cylinders), 2003 Fiat Punto is equipped with a bigger engine. In terms of performance, both vehicles can yield 83 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 2003 Fiat Punto weights approximately 195 kg more than 1999 Daihatsu Charade.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Fiat Punto (196 Nm @ 1500 RPM) has 91 more torque (in Nm) than 1999 Daihatsu Charade. (105 Nm @ 5000 RPM). This means 2003 Fiat Punto will have an easier job in driving up hills or pulling heavy equipment than 1999 Daihatsu Charade.
Compare all specifications:
1999 Daihatsu Charade | 2003 Fiat Punto | |
Make | Daihatsu | Fiat |
Model | Charade | Punto |
Year Released | 1999 | 2003 |
Engine Position | Front | Front |
Engine Size | 1296 cc | 1901 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 83 HP | 83 HP |
Engine RPM | 6500 RPM | 3500 RPM |
Torque | 105 Nm | 196 Nm |
Torque RPM | 5000 RPM | 1500 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 3 doors | 3 doors |
Vehicle Weight | 845 kg | 1040 kg |
Vehicle Length | 3790 mm | 3850 mm |
Vehicle Width | 1630 mm | 1670 mm |
Vehicle Height | 1400 mm | 1490 mm |
Wheelbase Size | 2400 mm | 2470 mm |