1999 Donkervoort D8 vs. 2010 Mazda 3

To start off, 2010 Mazda 3 is newer by 11 year(s). Which means there will be less support and parts availability for 1999 Donkervoort D8. In addition, the cost of maintenance, including insurance, on 1999 Donkervoort D8 would be higher. At 2,500 cc (4 cylinders), 2010 Mazda 3 is equipped with a bigger engine. In terms of performance, 2010 Mazda 3 (167 HP @ 6000 RPM) has 19 more horse power than 1999 Donkervoort D8. (148 HP @ 5700 RPM) In normal driving conditions, 2010 Mazda 3 should accelerate faster than 1999 Donkervoort D8. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda 3 weights approximately 758 kg more than 1999 Donkervoort D8. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1999 Donkervoort D8 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1999 Donkervoort D8. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda 3 (228 Nm @ 4000 RPM) has 18 more torque (in Nm) than 1999 Donkervoort D8. (210 Nm @ 1750 RPM). This means 2010 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1999 Donkervoort D8. 2010 Mazda 3 has automatic transmission and 1999 Donkervoort D8 has manual transmission. 1999 Donkervoort D8 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mazda 3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1999 Donkervoort D8 2010 Mazda 3
Make Donkervoort Mazda
Model D8 3
Year Released 1999 2010
Engine Position Front Front
Engine Size 1780 cc 2500 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 5 valves 4 valves
Horse Power 148 HP 167 HP
Engine RPM 5700 RPM 6000 RPM
Torque 210 Nm 228 Nm
Torque RPM 1750 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 5-speed automatic
Vehicle Weight 625 kg 1383 kg
Vehicle Length 3420 mm 4506 mm
Vehicle Width 1740 mm 1755 mm
Vehicle Height 1110 mm 1471 mm
Wheelbase Size 2310 mm 2639 mm