1999 Fiat Brava vs. 1988 Saab 900i

To start off, 1999 Fiat Brava is newer by 11 year(s). Which means there will be less support and parts availability for 1988 Saab 900i. In addition, the cost of maintenance, including insurance, on 1988 Saab 900i would be higher. At 1,985 cc (4 cylinders), 1988 Saab 900i is equipped with a bigger engine. In terms of performance, 1988 Saab 900i (135 HP @ 5300 RPM) has 53 more horse power than 1999 Fiat Brava. (82 HP @ 5500 RPM) In normal driving conditions, 1988 Saab 900i should accelerate faster than 1999 Fiat Brava. With that said, vehicle weight also plays an important factor in acceleration. 1988 Saab 900i weights approximately 245 kg more than 1999 Fiat Brava. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Saab 900i (172 Nm @ 3000 RPM) has 59 more torque (in Nm) than 1999 Fiat Brava. (113 Nm @ 4250 RPM). This means 1988 Saab 900i will have an easier job in driving up hills or pulling heavy equipment than 1999 Fiat Brava.

Compare all specifications:

1999 Fiat Brava 1988 Saab 900i
Make Fiat Saab
Model Brava 900i
Year Released 1999 1988
Engine Position Front Front
Engine Size 1301 cc 1985 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 82 HP 135 HP
Engine RPM 5500 RPM 5300 RPM
Torque 113 Nm 172 Nm
Torque RPM 4250 RPM 3000 RPM
Engine Compression Ratio 10.2:1 10.1:1
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1040 kg 1285 kg
Vehicle Length 4200 mm 4950 mm
Vehicle Width 1750 mm 1700 mm
Vehicle Height 1420 mm 1430 mm
Wheelbase Size 2550 mm 2720 mm
Fuel Tank Capacity 63 L 58 L