1999 Fiat Punto vs. 2008 Ford Bantam
To start off, 2008 Ford Bantam is newer by 9 year(s). Which means there will be less support and parts availability for 1999 Fiat Punto. In addition, the cost of maintenance, including insurance, on 1999 Fiat Punto would be higher. At 1,747 cc (4 cylinders), 1999 Fiat Punto is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1999 Fiat Punto weights approximately 80 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 Fiat Punto (164 Nm @ 4300 RPM) has 54 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1999 Fiat Punto will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
1999 Fiat Punto | 2008 Ford Bantam | |
Make | Fiat | Ford |
Model | Punto | Bantam |
Year Released | 1999 | 2008 |
Body Type | Hatchback | Pickup |
Engine Position | Front | Front |
Engine Size | 1747 cc | 1297 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 130 HP | 0 HP |
Torque | 164 Nm | 110 Nm |
Torque RPM | 4300 RPM | 3000 RPM |
Engine Bore Size | 82 mm | 74 mm |
Engine Stroke Size | 82.7 mm | 75.5 mm |
Engine Compression Ratio | 10.3:1 | 10.2:1 |
Top Speed | 205 km/hour | 158 km/hour |
Acceleration 0-100mph | 8.6 seconds | 12.9 seconds |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 3 doors | 2 doors |
Vehicle Weight | 1040 kg | 960 kg |
Vehicle Length | 3810 mm | 4280 mm |
Vehicle Width | 1670 mm | 1470 mm |
Vehicle Height | 1490 mm | 1640 mm |
Wheelbase Size | 2470 mm | 2670 mm |
Fuel Tank Capacity | 47 L | 54 L |