1999 Ford Contour vs. 1980 Lancia Gamma
To start off, 1999 Ford Contour is newer by 19 year(s). Which means there will be less support and parts availability for 1980 Lancia Gamma. In addition, the cost of maintenance, including insurance, on 1980 Lancia Gamma would be higher. At 1,995 cc (4 cylinders), 1980 Lancia Gamma is equipped with a bigger engine. In terms of performance, 1999 Ford Contour (128 HP @ 5500 RPM) has 11 more horse power than 1980 Lancia Gamma. (117 HP @ 5500 RPM). In normal driving conditions, 1999 Ford Contour should accelerate faster than 1980 Lancia Gamma. With that said, vehicle weight also plays an important factor in acceleration. 1980 Lancia Gamma weights approximately 78 kg more than 1999 Ford Contour.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 175 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.
Compare all specifications:
1999 Ford Contour | 1980 Lancia Gamma | |
Make | Ford | Lancia |
Model | Contour | Gamma |
Year Released | 1999 | 1980 |
Engine Position | Front | Front |
Engine Size | 1989 cc | 1995 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 128 HP | 117 HP |
Engine RPM | 5500 RPM | 5500 RPM |
Torque | 175 Nm | 175 Nm |
Torque RPM | 4000 RPM | 3500 RPM |
Engine Compression Ratio | 10.0:1 | 8.9:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1242 kg | 1320 kg |
Vehicle Length | 4680 mm | 4590 mm |
Vehicle Width | 1760 mm | 1740 mm |
Vehicle Height | 1380 mm | 1420 mm |
Wheelbase Size | 2710 mm | 2680 mm |