1999 SsangYong Chairman H vs. 1967 Aston Martin DB6

To start off, 1999 SsangYong Chairman H is newer by 32 year(s). Which means there will be less support and parts availability for 1967 Aston Martin DB6. In addition, the cost of maintenance, including insurance, on 1967 Aston Martin DB6 would be higher. At 3,995 cc (6 cylinders), 1967 Aston Martin DB6 is equipped with a bigger engine. In terms of performance, 1967 Aston Martin DB6 (325 HP @ 5750 RPM) has 177 more horse power than 1999 SsangYong Chairman H. (148 HP @ 5600 RPM) In normal driving conditions, 1967 Aston Martin DB6 should accelerate faster than 1999 SsangYong Chairman H. With that said, vehicle weight also plays an important factor in acceleration. 1967 Aston Martin DB6 weights approximately 50 kg more than 1999 SsangYong Chairman H. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 Aston Martin DB6 (400 Nm @ 4500 RPM) has 187 more torque (in Nm) than 1999 SsangYong Chairman H. (213 Nm @ 3600 RPM). This means 1967 Aston Martin DB6 will have an easier job in driving up hills or pulling heavy equipment than 1999 SsangYong Chairman H. 1999 SsangYong Chairman H has automatic transmission and 1967 Aston Martin DB6 has manual transmission. 1967 Aston Martin DB6 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 SsangYong Chairman H will be easier to drive especially in heavy traffic.

Compare all specifications:

1999 SsangYong Chairman H 1967 Aston Martin DB6
Make SsangYong Aston Martin
Model Chairman H DB6
Year Released 1999 1967
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 2294 cc 3995 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 148 HP 325 HP
Engine RPM 5600 RPM 5750 RPM
Torque 213 Nm 400 Nm
Torque RPM 3600 RPM 4500 RPM
Engine Bore Size 90.9 mm 96 mm
Engine Stroke Size 88.4 mm 92 mm
Engine Compression Ratio 10.4:1 9.4:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1575 kg 1625 kg
Vehicle Length 5060 mm 4630 mm
Vehicle Width 1830 mm 1680 mm
Vehicle Height 1470 mm 1330 mm
Wheelbase Size 2910 mm 2590 mm