2000 Alfa Romeo 147 vs. 2013 Cadillac ATS

To start off, 2013 Cadillac ATS is newer by 13 year(s). Which means there will be less support and parts availability for 2000 Alfa Romeo 147. In addition, the cost of maintenance, including insurance, on 2000 Alfa Romeo 147 would be higher. At 2,500 cc (4 cylinders), 2013 Cadillac ATS is equipped with a bigger engine. In terms of performance, 2013 Cadillac ATS (199 HP @ 6300 RPM) has 81 more horse power than 2000 Alfa Romeo 147. (118 HP @ 6200 RPM) In normal driving conditions, 2013 Cadillac ATS should accelerate faster than 2000 Alfa Romeo 147. With that said, vehicle weight also plays an important factor in acceleration. 2013 Cadillac ATS weights approximately 297 kg more than 2000 Alfa Romeo 147. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 Cadillac ATS is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 Cadillac ATS. However, in wet, icy, snow, or gravel driving conditions, 2000 Alfa Romeo 147, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Cadillac ATS (258 Nm @ 4400 RPM) has 112 more torque (in Nm) than 2000 Alfa Romeo 147. (146 Nm @ 4200 RPM). This means 2013 Cadillac ATS will have an easier job in driving up hills or pulling heavy equipment than 2000 Alfa Romeo 147. 2013 Cadillac ATS has automatic transmission and 2000 Alfa Romeo 147 has manual transmission. 2000 Alfa Romeo 147 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Cadillac ATS will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 Alfa Romeo 147 2013 Cadillac ATS
Make Alfa Romeo Cadillac
Model 147 ATS
Year Released 2000 2013
Engine Position Front Front
Engine Size 1598 cc 2500 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 118 HP 199 HP
Engine RPM 6200 RPM 6300 RPM
Torque 146 Nm 258 Nm
Torque RPM 4200 RPM 4400 RPM
Engine Bore Size 82 mm 88 mm
Engine Stroke Size 75.7 mm 101 mm
Engine Compression Ratio 10.3:1 11.4
Drive Type Front Rear
Transmission Type Manual 6-speed automatic
Number of Seats 5 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1206 kg 1503 kg
Vehicle Length 4180 mm 4643 mm
Vehicle Width 1740 mm 1806 mm
Vehicle Height 1450 mm 1418 mm
Wheelbase Size 2550 mm 2776 mm
Fuel Consumption 6.3 L/100km 7.1 L/100km
Fuel Consumption City 11.1 L/100km 10.7 L/100km
Fuel Tank Capacity 60 L 61 L