2000 Alfa Romeo 156 vs. 1962 Bristol 407

To start off, 2000 Alfa Romeo 156 is newer by 38 year(s). Which means there will be less support and parts availability for 1962 Bristol 407. In addition, the cost of maintenance, including insurance, on 1962 Bristol 407 would be higher. At 5,129 cc (8 cylinders), 1962 Bristol 407 is equipped with a bigger engine. In terms of performance, 1962 Bristol 407 (215 HP @ 4400 RPM) has 111 more horse power than 2000 Alfa Romeo 156. (104 HP @ 4000 RPM) In normal driving conditions, 1962 Bristol 407 should accelerate faster than 2000 Alfa Romeo 156. With that said, vehicle weight also plays an important factor in acceleration. 1962 Bristol 407 weights approximately 305 kg more than 2000 Alfa Romeo 156. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1962 Bristol 407 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Bristol 407. However, in wet, icy, snow, or gravel driving conditions, 2000 Alfa Romeo 156, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Bristol 407 (463 Nm @ 2800 RPM) has 203 more torque (in Nm) than 2000 Alfa Romeo 156. (260 Nm @ 2000 RPM). This means 1962 Bristol 407 will have an easier job in driving up hills or pulling heavy equipment than 2000 Alfa Romeo 156. 1962 Bristol 407 has automatic transmission and 2000 Alfa Romeo 156 has manual transmission. 2000 Alfa Romeo 156 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1962 Bristol 407 will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 Alfa Romeo 156 1962 Bristol 407
Make Alfa Romeo Bristol
Model 156 407
Year Released 2000 1962
Engine Position Front Front
Engine Size 1910 cc 5129 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line in-line
Horse Power 104 HP 215 HP
Engine RPM 4000 RPM 4400 RPM
Torque 260 Nm 463 Nm
Torque RPM 2000 RPM 2800 RPM
Engine Bore Size 82 mm 98.6 mm
Engine Stroke Size 90.4 mm 84.1 mm
Engine Compression Ratio 18.5:1 9.0:1
Fuel Type Diesel Gasoline
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1280 kg 1585 kg
Vehicle Length 4440 mm 4880 mm
Vehicle Width 1750 mm 1740 mm
Vehicle Height 1430 mm 1530 mm
Wheelbase Size 2600 mm 2910 mm
Fuel Tank Capacity 63 L 81 L