2000 Alfa Romeo 156 vs. 1973 Chrysler 160
To start off, 2000 Alfa Romeo 156 is newer by 27 year(s). Which means there will be less support and parts availability for 1973 Chrysler 160. In addition, the cost of maintenance, including insurance, on 1973 Chrysler 160 would be higher. At 2,491 cc (6 cylinders), 2000 Alfa Romeo 156 is equipped with a bigger engine. In terms of performance, 2000 Alfa Romeo 156 (190 HP @ 6300 RPM) has 82 more horse power than 1973 Chrysler 160. (108 HP @ 5800 RPM). In normal driving conditions, 2000 Alfa Romeo 156 should accelerate faster than 1973 Chrysler 160. With that said, vehicle weight also plays an important factor in acceleration. 2000 Alfa Romeo 156 weights approximately 255 kg more than 1973 Chrysler 160. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1973 Chrysler 160 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Chrysler 160. However, in wet, icy, snow, or gravel driving conditions, 2000 Alfa Romeo 156, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Alfa Romeo 156 (222 Nm @ 5000 RPM) has 59 more torque (in Nm) than 1973 Chrysler 160. (163 Nm @ 3200 RPM). This means 2000 Alfa Romeo 156 will have an easier job in driving up hills or pulling heavy equipment than 1973 Chrysler 160. 1973 Chrysler 160 has automatic transmission and 2000 Alfa Romeo 156 has manual transmission. 2000 Alfa Romeo 156 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1973 Chrysler 160 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2000 Alfa Romeo 156 | 1973 Chrysler 160 | |
| Make | Alfa Romeo | Chrysler |
| Model | 156 | 160 |
| Year Released | 2000 | 1973 |
| Engine Position | Front | Front |
| Engine Size | 2491 cc | 1981 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 190 HP | 108 HP |
| Engine RPM | 6300 RPM | 5800 RPM |
| Torque | 222 Nm | 163 Nm |
| Torque RPM | 5000 RPM | 3200 RPM |
| Engine Bore Size | 88 mm | 91.7 mm |
| Engine Stroke Size | 68.3 mm | 75 mm |
| Engine Compression Ratio | 10.3:1 | 9.5:1 |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 1370 kg | 1115 kg |
| Vehicle Length | 4440 mm | 4540 mm |
| Vehicle Width | 1750 mm | 1730 mm |
| Vehicle Height | 1430 mm | 1440 mm |
| Wheelbase Size | 2600 mm | 2680 mm |
