2000 Audi Allroad vs. 1967 Jensen FF
To start off, 2000 Audi Allroad is newer by 33 year(s). Which means there will be less support and parts availability for 1967 Jensen FF. In addition, the cost of maintenance, including insurance, on 1967 Jensen FF would be higher. At 6,276 cc (8 cylinders), 1967 Jensen FF is equipped with a bigger engine. In terms of performance, 1967 Jensen FF (279 HP @ 4600 RPM) has 42 more horse power than 2000 Audi Allroad. (237 HP @ 5800 RPM) In normal driving conditions, 1967 Jensen FF should accelerate faster than 2000 Audi Allroad. With that said, vehicle weight also plays an important factor in acceleration. 1967 Jensen FF weights approximately 180 kg more than 2000 Audi Allroad. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1967 Jensen FF (587 Nm @ 2800 RPM) has 248 more torque (in Nm) than 2000 Audi Allroad. (339 Nm @ 1800 RPM). This means 1967 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 2000 Audi Allroad.
Compare all specifications:
| 2000 Audi Allroad | 1967 Jensen FF | |
| Make | Audi | Jensen |
| Model | Allroad | FF |
| Year Released | 2000 | 1967 |
| Engine Position | Front | Front |
| Engine Size | 2671 cc | 6276 cc |
| Engine Cylinders | 6 cylinders | 8 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 5 valves | 2 valves |
| Horse Power | 237 HP | 279 HP |
| Engine RPM | 5800 RPM | 4600 RPM |
| Torque | 339 Nm | 587 Nm |
| Torque RPM | 1800 RPM | 2800 RPM |
| Engine Bore Size | 81 mm | 108 mm |
| Engine Stroke Size | 86.4 mm | 85.9 mm |
| Engine Compression Ratio | 9.3:1 | 10.0:1 |
| Number of Doors | 5 doors | 2 doors |
| Vehicle Weight | 1795 kg | 1975 kg |
| Vehicle Length | 4820 mm | 4860 mm |
| Vehicle Width | 1860 mm | 1760 mm |
| Vehicle Height | 1530 mm | 1360 mm |
| Wheelbase Size | 2760 mm | 2780 mm |
| Fuel Tank Capacity | 70 L | 72 L |
