2000 Beijing BJ 2020 vs. 1965 Fiat 500

To start off, 2000 Beijing BJ 2020 is newer by 35 year(s). Which means there will be less support and parts availability for 1965 Fiat 500. In addition, the cost of maintenance, including insurance, on 1965 Fiat 500 would be higher. At 2,445 cc (4 cylinders), 2000 Beijing BJ 2020 is equipped with a bigger engine. In terms of performance, 2000 Beijing BJ 2020 (83 HP @ 3800 RPM) has 61 more horse power than 1965 Fiat 500. (22 HP @ 4400 RPM). In normal driving conditions, 2000 Beijing BJ 2020 should accelerate faster than 1965 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 2000 Beijing BJ 2020 weights approximately 1010 kg more than 1965 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2000 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1965 Fiat 500. In wet, icy, snow, or gravel driving conditions, 2000 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Beijing BJ 2020 (173 Nm @ 2200 RPM) has 137 more torque (in Nm) than 1965 Fiat 500. (36 Nm @ 2800 RPM). This means 2000 Beijing BJ 2020 will have an easier job in driving up hills or pulling heavy equipment than 1965 Fiat 500.

Compare all specifications:

2000 Beijing BJ 2020 1965 Fiat 500
Make Beijing Fiat
Model BJ 2020 500
Year Released 2000 1965
Engine Size 2445 cc 498 cc
Engine Cylinders 4 cylinders 2 cylinders
Engine Type in-line in-line
Horse Power 83 HP 22 HP
Engine RPM 3800 RPM 4400 RPM
Torque 173 Nm 36 Nm
Torque RPM 2200 RPM 2800 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Vehicle Weight 1550 kg 540 kg
Vehicle Length 3870 mm 3190 mm
Vehicle Width 1760 mm 1330 mm
Vehicle Height 1880 mm 1360 mm
Wheelbase Size 2310 mm 1950 mm