2000 Beijing BJ 2020 vs. 1995 Mazda RX-01
To start off, 2000 Beijing BJ 2020 is newer by 5 year(s). Which means there will be less support and parts availability for 1995 Mazda RX-01. In addition, the cost of maintenance, including insurance, on 1995 Mazda RX-01 would be higher. At 2,660 cc (4 cylinders), 2000 Beijing BJ 2020 is equipped with a bigger engine. In terms of performance, 1995 Mazda RX-01 (220 HP @ 8500 RPM) has 120 more horse power than 2000 Beijing BJ 2020. (100 HP @ 3800 RPM) In normal driving conditions, 1995 Mazda RX-01 should accelerate faster than 2000 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 2000 Beijing BJ 2020 weights approximately 450 kg more than 1995 Mazda RX-01.
Because 2000 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1995 Mazda RX-01. In wet, icy, snow, or gravel driving conditions, 2000 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Mazda RX-01 (216 Nm @ 6000 RPM) has 19 more torque (in Nm) than 2000 Beijing BJ 2020. (197 Nm @ 2500 RPM). This means 1995 Mazda RX-01 will have an easier job in driving up hills or pulling heavy equipment than 2000 Beijing BJ 2020.
Compare all specifications:
| 2000 Beijing BJ 2020 | 1995 Mazda RX-01 | |
| Make | Beijing | Mazda |
| Model | BJ 2020 | RX-01 |
| Year Released | 2000 | 1995 |
| Engine Size | 2660 cc | 2614 cc |
| Engine Type | in-line | dual-disk rotary |
| Horse Power | 100 HP | 220 HP |
| Engine RPM | 3800 RPM | 8500 RPM |
| Torque | 197 Nm | 216 Nm |
| Torque RPM | 2500 RPM | 6000 RPM |
| Drive Type | 4WD | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1550 kg | 1100 kg |
| Vehicle Length | 4020 mm | 4060 mm |
| Vehicle Width | 1780 mm | 1740 mm |
| Vehicle Height | 1950 mm | 1250 mm |
| Wheelbase Size | 2310 mm | 2350 mm |
