2000 Beijing BJ 2020 vs. 2012 Audi A1
To start off, 2012 Audi A1 is newer by 12 year(s). Which means there will be less support and parts availability for 2000 Beijing BJ 2020. In addition, the cost of maintenance, including insurance, on 2000 Beijing BJ 2020 would be higher. At 2,445 cc (4 cylinders), 2000 Beijing BJ 2020 is equipped with a bigger engine. In terms of performance, 2012 Audi A1 (141 HP @ 4200 RPM) has 36 more horse power than 2000 Beijing BJ 2020. (105 HP @ 4800 RPM) In normal driving conditions, 2012 Audi A1 should accelerate faster than 2000 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 2000 Beijing BJ 2020 weights approximately 540 kg more than 2012 Audi A1.
Because 2000 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 2012 Audi A1. In wet, icy, snow, or gravel driving conditions, 2000 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Audi A1 (320 Nm @ 2500 RPM) has 139 more torque (in Nm) than 2000 Beijing BJ 2020. (181 Nm @ 3000 RPM). This means 2012 Audi A1 will have an easier job in driving up hills or pulling heavy equipment than 2000 Beijing BJ 2020.
Compare all specifications:
2000 Beijing BJ 2020 | 2012 Audi A1 | |
Make | Beijing | Audi |
Model | BJ 2020 | A1 |
Year Released | 2000 | 2012 |
Engine Size | 2445 cc | 1968 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 105 HP | 141 HP |
Engine RPM | 4800 RPM | 4200 RPM |
Torque | 181 Nm | 320 Nm |
Torque RPM | 3000 RPM | 2500 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | 4WD | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1580 kg | 1040 kg |
Vehicle Length | 4020 mm | 3954 mm |
Vehicle Width | 1780 mm | 1740 mm |
Vehicle Height | 1950 mm | 1416 mm |
Wheelbase Size | 2310 mm | 2469 mm |