2000 BMW 318 vs. 1978 Porsche 930

To start off, 2000 BMW 318 is newer by 22 year(s). Which means there will be less support and parts availability for 1978 Porsche 930. In addition, the cost of maintenance, including insurance, on 1978 Porsche 930 would be higher. At 3,298 cc (6 cylinders), 1978 Porsche 930 is equipped with a bigger engine. In terms of performance, 1978 Porsche 930 (296 HP @ 5500 RPM) has 180 more horse power than 2000 BMW 318. (116 HP @ 5500 RPM) In normal driving conditions, 1978 Porsche 930 should accelerate faster than 2000 BMW 318. With that said, vehicle weight also plays an important factor in acceleration. 2000 BMW 318 weights approximately 140 kg more than 1978 Porsche 930.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Porsche 930 (440 Nm @ 4000 RPM) has 259 more torque (in Nm) than 2000 BMW 318. (181 Nm @ 3900 RPM). This means 1978 Porsche 930 will have an easier job in driving up hills or pulling heavy equipment than 2000 BMW 318.

Compare all specifications:

2000 BMW 318 1978 Porsche 930
Make BMW Porsche
Model 318 930
Year Released 2000 1978
Body Type Coupe Convertible
Engine Position Front Rear
Engine Size 1895 cc 3298 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 116 HP 296 HP
Engine RPM 5500 RPM 5500 RPM
Torque 181 Nm 440 Nm
Torque RPM 3900 RPM 4000 RPM
Engine Bore Size 85 mm 97 mm
Engine Stroke Size 83.5 mm 74.4 mm
Fuel Type Gasoline - Premium Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1440 kg 1300 kg
Vehicle Length 4480 mm 4300 mm
Vehicle Width 1750 mm 1780 mm
Vehicle Height 1420 mm 1320 mm
Wheelbase Size 2730 mm 2510 mm