2000 BMW 325 vs. 1990 Honda Integra

To start off, 2000 BMW 325 is newer by 10 year(s). Which means there will be less support and parts availability for 1990 Honda Integra. In addition, the cost of maintenance, including insurance, on 1990 Honda Integra would be higher. At 2,494 cc (6 cylinders), 2000 BMW 325 is equipped with a bigger engine. In terms of performance, 2000 BMW 325 (201 HP @ 6000 RPM) has 95 more horse power than 1990 Honda Integra. (106 HP @ 6300 RPM). In normal driving conditions, 2000 BMW 325 should accelerate faster than 1990 Honda Integra. With that said, vehicle weight also plays an important factor in acceleration. 2000 BMW 325 weights approximately 510 kg more than 1990 Honda Integra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2000 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 1990 Honda Integra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 BMW 325 (245 Nm @ 3500 RPM) has 111 more torque (in Nm) than 1990 Honda Integra. (134 Nm @ 4500 RPM). This means 2000 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 1990 Honda Integra. 2000 BMW 325 has automatic transmission and 1990 Honda Integra has manual transmission. 1990 Honda Integra will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 BMW 325 will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 BMW 325 1990 Honda Integra
Make BMW Honda
Model 325 Integra
Year Released 2000 1990
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 2494 cc 1595 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 201 HP 106 HP
Engine RPM 6000 RPM 6300 RPM
Torque 245 Nm 134 Nm
Torque RPM 3500 RPM 4500 RPM
Engine Compression Ratio 10.5:1 9.0:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1520 kg 1010 kg
Vehicle Length 4490 mm 4400 mm
Vehicle Width 1750 mm 1700 mm
Vehicle Height 1380 mm 1330 mm
Wheelbase Size 2730 mm 2560 mm