2000 BMW 325 vs. 2010 Mitsubishi Lancer

To start off, 2010 Mitsubishi Lancer is newer by 10 year(s). Which means there will be less support and parts availability for 2000 BMW 325. In addition, the cost of maintenance, including insurance, on 2000 BMW 325 would be higher. At 2,494 cc (6 cylinders), 2000 BMW 325 is equipped with a bigger engine. In terms of performance, 2010 Mitsubishi Lancer (291 HP @ 6500 RPM) has 90 more horse power than 2000 BMW 325. (201 HP @ 6000 RPM) In normal driving conditions, 2010 Mitsubishi Lancer should accelerate faster than 2000 BMW 325. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mitsubishi Lancer weights approximately 75 kg more than 2000 BMW 325. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Mitsubishi Lancer is all wheel drive (AWD), it will have significant more traction and grip than 2000 BMW 325. In wet, icy, snow, or gravel driving conditions, 2010 Mitsubishi Lancer will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mitsubishi Lancer (406 Nm @ 4000 RPM) has 161 more torque (in Nm) than 2000 BMW 325. (245 Nm @ 3500 RPM). This means 2010 Mitsubishi Lancer will have an easier job in driving up hills or pulling heavy equipment than 2000 BMW 325. 2000 BMW 325 has automatic transmission and 2010 Mitsubishi Lancer has manual transmission. 2010 Mitsubishi Lancer will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 BMW 325 will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 BMW 325 2010 Mitsubishi Lancer
Make BMW Mitsubishi
Model 325 Lancer
Year Released 2000 2010
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 2494 cc 2000 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 201 HP 291 HP
Engine RPM 6000 RPM 6500 RPM
Torque 245 Nm 406 Nm
Torque RPM 3500 RPM 4000 RPM
Drive Type Rear AWD
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1520 kg 1595 kg
Vehicle Length 4490 mm 4496 mm
Vehicle Width 1750 mm 1811 mm
Vehicle Height 1380 mm 1481 mm
Wheelbase Size 2730 mm 2649 mm
Fuel Tank Capacity 63 L 55 L