2000 BMW M3 vs. 2008 Chrysler Sebring
To start off, 2008 Chrysler Sebring is newer by 8 year(s). Which means there will be less support and parts availability for 2000 BMW M3. In addition, the cost of maintenance, including insurance, on 2000 BMW M3 would be higher. At 3,168 cc (6 cylinders), 2000 BMW M3 is equipped with a bigger engine. In terms of performance, 2000 BMW M3 (325 HP @ 7750 RPM) has 152 more horse power than 2008 Chrysler Sebring. (173 HP @ 6000 RPM). In normal driving conditions, 2000 BMW M3 should accelerate faster than 2008 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 248 kg more than 2000 BMW M3.
Because 2000 BMW M3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 BMW M3. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 BMW M3 (350 Nm @ 4900 RPM) has 125 more torque (in Nm) than 2008 Chrysler Sebring. (225 Nm @ 4400 RPM). This means 2000 BMW M3 will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler Sebring. 2008 Chrysler Sebring has automatic transmission and 2000 BMW M3 has manual transmission. 2000 BMW M3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 BMW M3 | 2008 Chrysler Sebring | |
Make | BMW | Chrysler |
Model | M3 | Sebring |
Year Released | 2000 | 2008 |
Body Type | Coupe | Coupe |
Engine Position | Front | Front |
Engine Size | 3168 cc | 2360 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 325 HP | 173 HP |
Engine RPM | 7750 RPM | 6000 RPM |
Torque | 350 Nm | 225 Nm |
Torque RPM | 4900 RPM | 4400 RPM |
Engine Compression Ratio | 10.2:1 | 10.5:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1570 kg | 1818 kg |
Vehicle Length | 4500 mm | 4850 mm |
Vehicle Width | 1790 mm | 1810 mm |
Vehicle Height | 1380 mm | 1510 mm |
Wheelbase Size | 2730 mm | 2770 mm |
Fuel Consumption Highway | 8.4 L/100km | 7.8 L/100km |
Fuel Consumption City | 17.8 L/100km | 11.2 L/100km |
Fuel Consumption Overall | 11.9 L/100km | 9.8 L/100km |
Fuel Tank Capacity | 63 L | 64 L |