2000 Cadillac Seville vs. 1958 Lancia Appia
To start off, 2000 Cadillac Seville is newer by 42 year(s). Which means there will be less support and parts availability for 1958 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1958 Lancia Appia would be higher. At 4,563 cc (8 cylinders), 2000 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2000 Cadillac Seville (271 HP @ 5200 RPM) has 228 more horse power than 1958 Lancia Appia. (43 HP @ 4800 RPM). In normal driving conditions, 2000 Cadillac Seville should accelerate faster than 1958 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2000 Cadillac Seville weights approximately 884 kg more than 1958 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2000 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Cadillac Seville (407 Nm @ 4400 RPM) has 330 more torque (in Nm) than 1958 Lancia Appia. (77 Nm @ 3000 RPM). This means 2000 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1958 Lancia Appia. 2000 Cadillac Seville has automatic transmission and 1958 Lancia Appia has manual transmission. 1958 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Cadillac Seville | 1958 Lancia Appia | |
Make | Cadillac | Lancia |
Model | Seville | Appia |
Year Released | 2000 | 1958 |
Engine Position | Front | Front |
Engine Size | 4563 cc | 1090 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 271 HP | 43 HP |
Engine RPM | 5200 RPM | 4800 RPM |
Torque | 407 Nm | 77 Nm |
Torque RPM | 4400 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1748 kg | 864 kg |
Vehicle Length | 5110 mm | 3980 mm |
Vehicle Width | 1910 mm | 1430 mm |
Vehicle Height | 1420 mm | 1410 mm |
Wheelbase Size | 2860 mm | 2520 mm |