2000 Cadillac Seville vs. 1963 Moretti 500
To start off, 2000 Cadillac Seville is newer by 37 year(s). Which means there will be less support and parts availability for 1963 Moretti 500. In addition, the cost of maintenance, including insurance, on 1963 Moretti 500 would be higher. At 4,572 cc (8 cylinders), 2000 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2000 Cadillac Seville (290 HP @ 6000 RPM) has 272 more horse power than 1963 Moretti 500. (18 HP @ 4800 RPM). In normal driving conditions, 2000 Cadillac Seville should accelerate faster than 1963 Moretti 500. With that said, vehicle weight also plays an important factor in acceleration. 2000 Cadillac Seville weights approximately 1187 kg more than 1963 Moretti 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Moretti 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Moretti 500. However, in wet, icy, snow, or gravel driving conditions, 2000 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Cadillac Seville (400 Nm @ 4400 RPM) has 365 more torque (in Nm) than 1963 Moretti 500. (35 Nm @ 3500 RPM). This means 2000 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1963 Moretti 500. 2000 Cadillac Seville has automatic transmission and 1963 Moretti 500 has manual transmission. 1963 Moretti 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Cadillac Seville | 1963 Moretti 500 | |
Make | Cadillac | Moretti |
Model | Seville | 500 |
Year Released | 2000 | 1963 |
Engine Size | 4572 cc | 479 cc |
Engine Cylinders | 8 cylinders | 2 cylinders |
Engine Type | V | in-line |
Horse Power | 290 HP | 18 HP |
Engine RPM | 6000 RPM | 4800 RPM |
Torque | 400 Nm | 35 Nm |
Torque RPM | 4400 RPM | 3500 RPM |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1827 kg | 640 kg |
Vehicle Length | 5000 mm | 3210 mm |
Vehicle Width | 1910 mm | 1330 mm |
Vehicle Height | 1410 mm | 1320 mm |
Wheelbase Size | 2890 mm | 1850 mm |