2000 Cadillac Seville vs. 1966 Triumph GT6
To start off, 2000 Cadillac Seville is newer by 34 year(s). Which means there will be less support and parts availability for 1966 Triumph GT6. In addition, the cost of maintenance, including insurance, on 1966 Triumph GT6 would be higher. At 4,572 cc (8 cylinders), 2000 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2000 Cadillac Seville (290 HP @ 6000 RPM) has 195 more horse power than 1966 Triumph GT6. (95 HP @ 5000 RPM). In normal driving conditions, 2000 Cadillac Seville should accelerate faster than 1966 Triumph GT6. With that said, vehicle weight also plays an important factor in acceleration. 2000 Cadillac Seville weights approximately 963 kg more than 1966 Triumph GT6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Triumph GT6 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Triumph GT6. However, in wet, icy, snow, or gravel driving conditions, 2000 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Cadillac Seville (400 Nm @ 4400 RPM) has 242 more torque (in Nm) than 1966 Triumph GT6. (158 Nm @ 3000 RPM). This means 2000 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1966 Triumph GT6. 2000 Cadillac Seville has automatic transmission and 1966 Triumph GT6 has manual transmission. 1966 Triumph GT6 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Cadillac Seville | 1966 Triumph GT6 | |
Make | Cadillac | Triumph |
Model | Seville | GT6 |
Year Released | 2000 | 1966 |
Engine Position | Front | Front |
Engine Size | 4572 cc | 1996 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | V | in-line |
Horse Power | 290 HP | 95 HP |
Engine RPM | 6000 RPM | 5000 RPM |
Torque | 400 Nm | 158 Nm |
Torque RPM | 4400 RPM | 3000 RPM |
Engine Bore Size | 93 mm | 74.7 mm |
Engine Stroke Size | 84 mm | 76 mm |
Engine Compression Ratio | 10.0:1 | 9.5:1 |
Top Speed | 241 km/hour | 171 km/hour |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1827 kg | 864 kg |
Vehicle Length | 5000 mm | 3690 mm |
Vehicle Width | 1910 mm | 1450 mm |
Vehicle Height | 1410 mm | 1200 mm |
Wheelbase Size | 2890 mm | 2110 mm |
Fuel Tank Capacity | 70 L | 44 L |