2000 Cadillac Seville vs. 1969 Holden Monaro
To start off, 2000 Cadillac Seville is newer by 31 year(s). Which means there will be less support and parts availability for 1969 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1969 Holden Monaro would be higher. At 4,572 cc (8 cylinders), 2000 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2000 Cadillac Seville (290 HP @ 6000 RPM) has 178 more horse power than 1969 Holden Monaro. (112 HP @ 4400 RPM). In normal driving conditions, 2000 Cadillac Seville should accelerate faster than 1969 Holden Monaro. With that said, vehicle weight also plays an important factor in acceleration. 2000 Cadillac Seville weights approximately 512 kg more than 1969 Holden Monaro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1969 Holden Monaro is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1969 Holden Monaro. However, in wet, icy, snow, or gravel driving conditions, 2000 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Cadillac Seville (400 Nm @ 4400 RPM) has 187 more torque (in Nm) than 1969 Holden Monaro. (213 Nm @ 2000 RPM). This means 2000 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1969 Holden Monaro. 2000 Cadillac Seville has automatic transmission and 1969 Holden Monaro has manual transmission. 1969 Holden Monaro will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Cadillac Seville | 1969 Holden Monaro | |
Make | Cadillac | Holden |
Model | Seville | Monaro |
Year Released | 2000 | 1969 |
Engine Position | Front | Front |
Engine Size | 4572 cc | 2636 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | V | in-line |
Horse Power | 290 HP | 112 HP |
Engine RPM | 6000 RPM | 4400 RPM |
Torque | 400 Nm | 213 Nm |
Torque RPM | 4400 RPM | 2000 RPM |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1827 kg | 1315 kg |
Vehicle Length | 5000 mm | 4700 mm |
Vehicle Width | 1910 mm | 1840 mm |
Vehicle Height | 1410 mm | 1400 mm |
Wheelbase Size | 2890 mm | 2830 mm |