2000 Chevrolet Camaro vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 10 year(s). Which means there will be less support and parts availability for 2000 Chevrolet Camaro. In addition, the cost of maintenance, including insurance, on 2000 Chevrolet Camaro would be higher. At 3,390 cc (6 cylinders), 2000 Chevrolet Camaro is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (173 HP @ 6000 RPM) has 15 more horse power than 2000 Chevrolet Camaro. (158 HP @ 4600 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 2000 Chevrolet Camaro. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 460 kg more than 2000 Chevrolet Camaro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2000 Chevrolet Camaro is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 Chevrolet Camaro. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Chevrolet Camaro (271 Nm @ 3600 RPM) has 46 more torque (in Nm) than 2010 Chrysler Sebring. (225 Nm @ 4400 RPM). This means 2000 Chevrolet Camaro will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2010 Chrysler Sebring has automatic transmission and 2000 Chevrolet Camaro has manual transmission. 2000 Chevrolet Camaro will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Chevrolet Camaro | 2010 Chrysler Sebring | |
Make | Chevrolet | Chrysler |
Model | Camaro | Sebring |
Year Released | 2000 | 2010 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 3390 cc | 2358 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 158 HP | 173 HP |
Engine RPM | 4600 RPM | 6000 RPM |
Torque | 271 Nm | 225 Nm |
Torque RPM | 3600 RPM | 4400 RPM |
Engine Bore Size | 92 mm | 86 mm |
Engine Stroke Size | 84 mm | 101 mm |
Engine Compression Ratio | 9.0:1 | 9.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1413 kg | 1873 kg |
Vehicle Length | 4910 mm | 4850 mm |
Vehicle Width | 1890 mm | 1810 mm |
Vehicle Height | 1310 mm | 1510 mm |
Wheelbase Size | 2450 mm | 2770 mm |
Fuel Consumption Overall | 14 L/100km | 9.8 L/100km |
Fuel Tank Capacity | 68 L | 64 L |