2000 Chevrolet SSR vs. 2010 Chrysler Sebring

To start off, 2010 Chrysler Sebring is newer by 10 year(s). Which means there will be less support and parts availability for 2000 Chevrolet SSR. In addition, the cost of maintenance, including insurance, on 2000 Chevrolet SSR would be higher. At 5,324 cc (8 cylinders), 2000 Chevrolet SSR is equipped with a bigger engine. In terms of performance, 2000 Chevrolet SSR (300 HP) has 162 more horse power than 2010 Chrysler Sebring. (138 HP). In normal driving conditions, 2000 Chevrolet SSR should accelerate faster than 2010 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2000 Chevrolet SSR weights approximately 515 kg more than 2010 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2000 Chevrolet SSR is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 Chevrolet SSR. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Chevrolet SSR (481 Nm) has 171 more torque (in Nm) than 2010 Chrysler Sebring. (310 Nm). This means 2000 Chevrolet SSR will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2000 Chevrolet SSR has automatic transmission and 2010 Chrysler Sebring has manual transmission. 2010 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Chevrolet SSR will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 Chevrolet SSR 2010 Chrysler Sebring
Make Chevrolet Chrysler
Model SSR Sebring
Year Released 2000 2010
Body Type Pickup Coupe
Engine Position Front Front
Engine Size 5324 cc 1967 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 300 HP 138 HP
Torque 481 Nm 310 Nm
Engine Compression Ratio 9.5:1 18.5:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 2150 kg 1635 kg
Vehicle Length 4870 mm 4860 mm
Vehicle Width 2000 mm 1850 mm
Vehicle Height 1640 mm 1500 mm
Wheelbase Size 2950 mm 2770 mm