2000 Chrysler 300 vs. 1980 Toyota Corolla

To start off, 2000 Chrysler 300 is newer by 20 year(s). Which means there will be less support and parts availability for 1980 Toyota Corolla. In addition, the cost of maintenance, including insurance, on 1980 Toyota Corolla would be higher. At 2,736 cc (6 cylinders), 2000 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2000 Chrysler 300 (200 HP @ 5800 RPM) has 132 more horse power than 1980 Toyota Corolla. (68 HP @ 5600 RPM). In normal driving conditions, 2000 Chrysler 300 should accelerate faster than 1980 Toyota Corolla. With that said, vehicle weight also plays an important factor in acceleration. 2000 Chrysler 300 weights approximately 695 kg more than 1980 Toyota Corolla. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 Toyota Corolla is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Toyota Corolla. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler 300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Chrysler 300 (255 Nm @ 4900 RPM) has 150 more torque (in Nm) than 1980 Toyota Corolla. (105 Nm @ 3600 RPM). This means 2000 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1980 Toyota Corolla. 2000 Chrysler 300 has automatic transmission and 1980 Toyota Corolla has manual transmission. 1980 Toyota Corolla will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 Chrysler 300 1980 Toyota Corolla
Make Chrysler Toyota
Model 300 Corolla
Year Released 2000 1980
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 2736 cc 1290 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 200 HP 68 HP
Engine RPM 5800 RPM 5600 RPM
Torque 255 Nm 105 Nm
Torque RPM 4900 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1580 kg 885 kg
Vehicle Length 5010 mm 4110 mm
Vehicle Width 1930 mm 1630 mm
Vehicle Height 1420 mm 1340 mm
Wheelbase Size 2880 mm 2410 mm