2000 Chrysler Concorde vs. 1966 Ginetta G12
To start off, 2000 Chrysler Concorde is newer by 34 year(s). Which means there will be less support and parts availability for 1966 Ginetta G12. In addition, the cost of maintenance, including insurance, on 1966 Ginetta G12 would be higher. At 2,736 cc (6 cylinders), 2000 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 2000 Chrysler Concorde (200 HP @ 5800 RPM) has 42 more horse power than 1966 Ginetta G12. (158 HP @ 7500 RPM). In normal driving conditions, 2000 Chrysler Concorde should accelerate faster than 1966 Ginetta G12. With that said, vehicle weight also plays an important factor in acceleration. 2000 Chrysler Concorde weights approximately 788 kg more than 1966 Ginetta G12. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Ginetta G12 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Ginetta G12. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Chrysler Concorde (258 Nm @ 4850 RPM) has 88 more torque (in Nm) than 1966 Ginetta G12. (170 Nm @ 5500 RPM). This means 2000 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1966 Ginetta G12. 2000 Chrysler Concorde has automatic transmission and 1966 Ginetta G12 has manual transmission. 1966 Ginetta G12 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Chrysler Concorde | 1966 Ginetta G12 | |
Make | Chrysler | Ginetta |
Model | Concorde | G12 |
Year Released | 2000 | 1966 |
Engine Position | Front | Middle |
Engine Size | 2736 cc | 1590 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 200 HP | 158 HP |
Engine RPM | 5800 RPM | 7500 RPM |
Torque | 258 Nm | 170 Nm |
Torque RPM | 4850 RPM | 5500 RPM |
Engine Bore Size | 86 mm | 83.5 mm |
Engine Stroke Size | 78.5 mm | 72.6 mm |
Engine Compression Ratio | 10.0:1 | 11.0:1 |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1575 kg | 787 kg |
Vehicle Length | 5280 mm | 3560 mm |
Vehicle Width | 1900 mm | 1560 mm |
Vehicle Height | 1420 mm | 1020 mm |
Wheelbase Size | 2880 mm | 2290 mm |
Fuel Tank Capacity | 68 L | 54 L |