2000 Chrysler Concorde vs. 1978 Nissan Skyline
To start off, 2000 Chrysler Concorde is newer by 22 year(s). Which means there will be less support and parts availability for 1978 Nissan Skyline. In addition, the cost of maintenance, including insurance, on 1978 Nissan Skyline would be higher. At 2,736 cc (6 cylinders), 2000 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 2000 Chrysler Concorde (200 HP @ 5800 RPM) has 111 more horse power than 1978 Nissan Skyline. (89 HP @ 6000 RPM). In normal driving conditions, 2000 Chrysler Concorde should accelerate faster than 1978 Nissan Skyline. With that said, vehicle weight also plays an important factor in acceleration. 2000 Chrysler Concorde weights approximately 525 kg more than 1978 Nissan Skyline. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1978 Nissan Skyline is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1978 Nissan Skyline. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Chrysler Concorde (258 Nm @ 4850 RPM) has 125 more torque (in Nm) than 1978 Nissan Skyline. (133 Nm @ 3600 RPM). This means 2000 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1978 Nissan Skyline. 2000 Chrysler Concorde has automatic transmission and 1978 Nissan Skyline has manual transmission. 1978 Nissan Skyline will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2000 Chrysler Concorde | 1978 Nissan Skyline | |
| Make | Chrysler | Nissan |
| Model | Concorde | Skyline |
| Year Released | 2000 | 1978 |
| Engine Position | Front | Front |
| Engine Size | 2736 cc | 1595 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 200 HP | 89 HP |
| Engine RPM | 5800 RPM | 6000 RPM |
| Torque | 258 Nm | 133 Nm |
| Torque RPM | 4850 RPM | 3600 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Vehicle Weight | 1575 kg | 1050 kg |
| Vehicle Length | 5280 mm | 4410 mm |
| Vehicle Width | 1900 mm | 1630 mm |
| Vehicle Height | 1420 mm | 1400 mm |
| Wheelbase Size | 2880 mm | 2520 mm |
