2000 Chrysler ESX 3 vs. 1956 Mercedes-Benz 300
To start off, 2000 Chrysler ESX 3 is newer by 44 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1956 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1956 Mercedes-Benz 300 (172 HP @ 5400 RPM) has 98 more horse power than 2000 Chrysler ESX 3. (74 HP @ 6400 RPM) In normal driving conditions, 1956 Mercedes-Benz 300 should accelerate faster than 2000 Chrysler ESX 3. With that said, vehicle weight also plays an important factor in acceleration. 1956 Mercedes-Benz 300 weights approximately 160 kg more than 2000 Chrysler ESX 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler ESX 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Chrysler ESX 3 (332 Nm) has 77 more torque (in Nm) than 1956 Mercedes-Benz 300. (255 Nm). This means 2000 Chrysler ESX 3 will have an easier job in driving up hills or pulling heavy equipment than 1956 Mercedes-Benz 300. 2000 Chrysler ESX 3 has automatic transmission and 1956 Mercedes-Benz 300 has manual transmission. 1956 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Chrysler ESX 3 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2000 Chrysler ESX 3 | 1956 Mercedes-Benz 300 | |
| Make | Chrysler | Mercedes-Benz |
| Model | ESX 3 | 300 |
| Year Released | 2000 | 1956 |
| Engine Position | Front | Front |
| Engine Size | 1499 cc | 2996 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 74 HP | 172 HP |
| Engine RPM | 6400 RPM | 5400 RPM |
| Torque | 332 Nm | 255 Nm |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 4 seats | 4 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1620 kg | 1780 kg |
| Vehicle Length | 4910 mm | 4710 mm |
| Vehicle Width | 1890 mm | 1920 mm |
| Vehicle Height | 1400 mm | 1520 mm |
| Wheelbase Size | 3000 mm | 2910 mm |
