2000 Chrysler Panel Cruiser vs. 1967 Holden HR
To start off, 2000 Chrysler Panel Cruiser is newer by 33 year(s). Which means there will be less support and parts availability for 1967 Holden HR. In addition, the cost of maintenance, including insurance, on 1967 Holden HR would be higher. At 3,048 cc (6 cylinders), 1967 Holden HR is equipped with a bigger engine. In terms of performance, 2000 Chrysler Panel Cruiser (200 HP @ 6400 RPM) has 92 more horse power than 1967 Holden HR. (108 HP @ 4200 RPM). In normal driving conditions, 2000 Chrysler Panel Cruiser should accelerate faster than 1967 Holden HR. With that said, vehicle weight also plays an important factor in acceleration. 2000 Chrysler Panel Cruiser weights approximately 274 kg more than 1967 Holden HR. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1967 Holden HR is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Holden HR. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler Panel Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Chrysler Panel Cruiser (271 Nm) has 26 more torque (in Nm) than 1967 Holden HR. (245 Nm). This means 2000 Chrysler Panel Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1967 Holden HR. 1967 Holden HR has automatic transmission and 2000 Chrysler Panel Cruiser has manual transmission. 2000 Chrysler Panel Cruiser will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1967 Holden HR will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Chrysler Panel Cruiser | 1967 Holden HR | |
Make | Chrysler | Holden |
Model | Panel Cruiser | HR |
Year Released | 2000 | 1967 |
Engine Position | Front | Front |
Engine Size | 2398 cc | 3048 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 200 HP | 108 HP |
Engine RPM | 6400 RPM | 4200 RPM |
Torque | 271 Nm | 245 Nm |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1564 kg | 1290 kg |
Vehicle Length | 4290 mm | 4610 mm |
Vehicle Width | 1710 mm | 1790 mm |
Vehicle Height | 1610 mm | 1490 mm |
Wheelbase Size | 2620 mm | 2700 mm |