2000 Chrysler Sebring vs. 2012 Ford Crown Victoria
To start off, 2012 Ford Crown Victoria is newer by 12 year(s). Which means there will be less support and parts availability for 2000 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2000 Chrysler Sebring would be higher. At 4,604 cc (8 cylinders), 2012 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2012 Ford Crown Victoria (239 HP @ 4750 RPM) has 101 more horse power than 2000 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2012 Ford Crown Victoria should accelerate faster than 2000 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2012 Ford Crown Victoria weights approximately 1546 kg more than 2000 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Ford Crown Victoria (374 Nm @ 4000 RPM) has 198 more torque (in Nm) than 2000 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2012 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2000 Chrysler Sebring. 2012 Ford Crown Victoria has automatic transmission and 2000 Chrysler Sebring has manual transmission. 2000 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Chrysler Sebring | 2012 Ford Crown Victoria | |
Make | Chrysler | Ford |
Model | Sebring | Crown Victoria |
Year Released | 2000 | 2012 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 4604 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 138 HP | 239 HP |
Engine RPM | 6000 RPM | 4750 RPM |
Torque | 176 Nm | 374 Nm |
Torque RPM | 4800 RPM | 4000 RPM |
Engine Bore Size | 87.5 mm | 90.2 mm |
Engine Stroke Size | 83 mm | 90 mm |
Engine Compression Ratio | 9.6:1 | 9.4:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1310 kg | 2856 kg |
Vehicle Length | 4770 mm | 5390 mm |
Vehicle Width | 1780 mm | 1970 mm |