2000 Chrysler Sebring vs. 2013 Toyota Tundra
To start off, 2013 Toyota Tundra is newer by 13 year(s). Which means there will be less support and parts availability for 2000 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2000 Chrysler Sebring would be higher. At 4,600 cc (8 cylinders), 2013 Toyota Tundra is equipped with a bigger engine. In terms of performance, 2013 Toyota Tundra (306 HP @ 5600 RPM) has 168 more horse power than 2000 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2013 Toyota Tundra should accelerate faster than 2000 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Tundra weights approximately 996 kg more than 2000 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 Toyota Tundra is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 Toyota Tundra. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Toyota Tundra (443 Nm @ 3400 RPM) has 267 more torque (in Nm) than 2000 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2013 Toyota Tundra will have an easier job in driving up hills or pulling heavy equipment than 2000 Chrysler Sebring. 2013 Toyota Tundra has automatic transmission and 2000 Chrysler Sebring has manual transmission. 2000 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Toyota Tundra will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Chrysler Sebring | 2013 Toyota Tundra | |
Make | Chrysler | Toyota |
Model | Sebring | Tundra |
Year Released | 2000 | 2013 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 4600 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 138 HP | 306 HP |
Engine RPM | 6000 RPM | 5600 RPM |
Torque | 176 Nm | 443 Nm |
Torque RPM | 4800 RPM | 3400 RPM |
Engine Bore Size | 87.5 mm | 94 mm |
Engine Stroke Size | 83 mm | 83 mm |
Engine Compression Ratio | 9.6:1 | 9.8:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 4 seats | 3 seats |
Vehicle Weight | 1310 kg | 2306 kg |
Vehicle Length | 4770 mm | 5810 mm |
Vehicle Width | 1780 mm | 2030 mm |