2000 Citroen C3 vs. 1956 Lancia Flaminia

To start off, 2000 Citroen C3 is newer by 44 year(s). Which means there will be less support and parts availability for 1956 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Flaminia would be higher. At 2,458 cc (6 cylinders), 1956 Lancia Flaminia is equipped with a bigger engine. In terms of performance, 1956 Lancia Flaminia (119 HP @ 5100 RPM) has 30 more horse power than 2000 Citroen C3. (89 HP @ 4000 RPM) In normal driving conditions, 1956 Lancia Flaminia should accelerate faster than 2000 Citroen C3. With that said, vehicle weight also plays an important factor in acceleration. 1956 Lancia Flaminia weights approximately 215 kg more than 2000 Citroen C3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2000 Citroen C3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Citroen C3 (200 Nm @ 1750 RPM) has 14 more torque (in Nm) than 1956 Lancia Flaminia. (186 Nm @ 3500 RPM). This means 2000 Citroen C3 will have an easier job in driving up hills or pulling heavy equipment than 1956 Lancia Flaminia. 2000 Citroen C3 has automatic transmission and 1956 Lancia Flaminia has manual transmission. 1956 Lancia Flaminia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Citroen C3 will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 Citroen C3 1956 Lancia Flaminia
Make Citroen Lancia
Model C3 Flaminia
Year Released 2000 1956
Engine Position Front Front
Engine Size 1396 cc 2458 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 89 HP 119 HP
Engine RPM 4000 RPM 5100 RPM
Torque 200 Nm 186 Nm
Torque RPM 1750 RPM 3500 RPM
Engine Bore Size 73.7 mm 80 mm
Engine Stroke Size 82 mm 81.5 mm
Engine Compression Ratio 18.0:1 9.0:1
Top Speed 177 km/hour 171 km/hour
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 995 kg 1210 kg
Vehicle Length 3860 mm 4690 mm
Vehicle Width 1670 mm 1750 mm
Vehicle Height 1540 mm 1430 mm
Wheelbase Size 2470 mm 2780 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]