2000 Citroen C3 vs. 1960 Ferrari 250 GTE
To start off, 2000 Citroen C3 is newer by 40 year(s). Which means there will be less support and parts availability for 1960 Ferrari 250 GTE. In addition, the cost of maintenance, including insurance, on 1960 Ferrari 250 GTE would be higher. At 2,953 cc (12 cylinders), 1960 Ferrari 250 GTE is equipped with a bigger engine. In terms of performance, 1960 Ferrari 250 GTE (232 HP @ 7000 RPM) has 123 more horse power than 2000 Citroen C3. (109 HP @ 5750 RPM) In normal driving conditions, 1960 Ferrari 250 GTE should accelerate faster than 2000 Citroen C3. With that said, vehicle weight also plays an important factor in acceleration. 1960 Ferrari 250 GTE weights approximately 540 kg more than 2000 Citroen C3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Ferrari 250 GTE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Ferrari 250 GTE. However, in wet, icy, snow, or gravel driving conditions, 2000 Citroen C3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1960 Ferrari 250 GTE (245 Nm @ 5000 RPM) has 135 more torque (in Nm) than 2000 Citroen C3. (110 Nm @ 4000 RPM). This means 1960 Ferrari 250 GTE will have an easier job in driving up hills or pulling heavy equipment than 2000 Citroen C3. 2000 Citroen C3 has automatic transmission and 1960 Ferrari 250 GTE has manual transmission. 1960 Ferrari 250 GTE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Citroen C3 will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Citroen C3 | 1960 Ferrari 250 GTE | |
Make | Citroen | Ferrari |
Model | C3 | 250 GTE |
Year Released | 2000 | 1960 |
Body Type | Hatchback | Coupe |
Engine Position | Front | Front |
Engine Size | 1587 cc | 2953 cc |
Engine Cylinders | 4 cylinders | 12 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 109 HP | 232 HP |
Engine RPM | 5750 RPM | 7000 RPM |
Torque | 110 Nm | 245 Nm |
Torque RPM | 4000 RPM | 5000 RPM |
Engine Bore Size | 78.5 mm | 73.1 mm |
Engine Stroke Size | 82 mm | 58.8 mm |
Engine Compression Ratio | 10.0:1 | 8.8:1 |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 5 doors | 2 doors |
Vehicle Weight | 890 kg | 1430 kg |
Vehicle Length | 3860 mm | 4710 mm |
Vehicle Width | 1670 mm | 1780 mm |
Vehicle Height | 1540 mm | 1370 mm |
Wheelbase Size | 2760 mm | 2600 mm |
Fuel Tank Capacity | 45 L | 140 L |