2000 Fiat Scudo vs. 1975 Lancia Fulvia
To start off, 2000 Fiat Scudo is newer by 25 year(s). Which means there will be less support and parts availability for 1975 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1975 Lancia Fulvia would be higher. At 1,584 cc (4 cylinders), 1975 Lancia Fulvia is equipped with a bigger engine. In terms of performance, 1975 Lancia Fulvia (114 HP @ 6000 RPM) has 36 more horse power than 2000 Fiat Scudo. (78 HP @ 5750 RPM) In normal driving conditions, 1975 Lancia Fulvia should accelerate faster than 2000 Fiat Scudo. With that said, vehicle weight also plays an important factor in acceleration. 2000 Fiat Scudo weights approximately 35 kg more than 1975 Lancia Fulvia.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Lancia Fulvia (153 Nm @ 4500 RPM) has 28 more torque (in Nm) than 2000 Fiat Scudo. (125 Nm @ 2750 RPM). This means 1975 Lancia Fulvia will have an easier job in driving up hills or pulling heavy equipment than 2000 Fiat Scudo.
Compare all specifications:
| 2000 Fiat Scudo | 1975 Lancia Fulvia | |
| Make | Fiat | Lancia |
| Model | Scudo | Fulvia |
| Year Released | 2000 | 1975 |
| Body Type | Van | Coupe |
| Engine Position | Front | Front |
| Engine Size | 1581 cc | 1584 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 78 HP | 114 HP |
| Engine RPM | 5750 RPM | 6000 RPM |
| Torque | 125 Nm | 153 Nm |
| Torque RPM | 2750 RPM | 4500 RPM |
| Engine Bore Size | 84 mm | 82 mm |
| Engine Stroke Size | 71.5 mm | 75 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 4 seats |
| Vehicle Weight | 1035 kg | 1000 kg |
| Vehicle Width | 1750 mm | 1570 mm |
