2000 Ford 24.7 vs. 2010 BMW M6

To start off, 2010 BMW M6 is newer by 10 year(s). Which means there will be less support and parts availability for 2000 Ford 24.7. In addition, the cost of maintenance, including insurance, on 2000 Ford 24.7 would be higher. At 5,000 cc (10 cylinders), 2010 BMW M6 is equipped with a bigger engine. In terms of performance, 2010 BMW M6 (500 HP @ 7750 RPM) has 372 more horse power than 2000 Ford 24.7. (128 HP @ 5750 RPM) In normal driving conditions, 2010 BMW M6 should accelerate faster than 2000 Ford 24.7. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW M6 weights approximately 787 kg more than 2000 Ford 24.7. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 BMW M6 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 BMW M6. However, in wet, icy, snow, or gravel driving conditions, 2000 Ford 24.7, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW M6 (519 Nm) has 160 more torque (in Nm) than 2000 Ford 24.7. (359 Nm). This means 2010 BMW M6 will have an easier job in driving up hills or pulling heavy equipment than 2000 Ford 24.7. 2000 Ford 24.7 has automatic transmission and 2010 BMW M6 has manual transmission. 2010 BMW M6 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Ford 24.7 will be easier to drive especially in heavy traffic.

Compare all specifications: