2000 Ford Contour vs. 1986 Mazda 929

To start off, 2000 Ford Contour is newer by 14 year(s). Which means there will be less support and parts availability for 1986 Mazda 929. In addition, the cost of maintenance, including insurance, on 1986 Mazda 929 would be higher. At 2,953 cc (6 cylinders), 1986 Mazda 929 is equipped with a bigger engine. In terms of performance, 1986 Mazda 929 (190 HP @ 5600 RPM) has 62 more horse power than 2000 Ford Contour. (128 HP @ 5500 RPM) In normal driving conditions, 1986 Mazda 929 should accelerate faster than 2000 Ford Contour. With that said, vehicle weight also plays an important factor in acceleration. 1986 Mazda 929 weights approximately 377 kg more than 2000 Ford Contour. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1986 Mazda 929 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1986 Mazda 929. However, in wet, icy, snow, or gravel driving conditions, 2000 Ford Contour, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Mazda 929 (259 Nm @ 4500 RPM) has 79 more torque (in Nm) than 2000 Ford Contour. (180 Nm @ 4000 RPM). This means 1986 Mazda 929 will have an easier job in driving up hills or pulling heavy equipment than 2000 Ford Contour. 1986 Mazda 929 has automatic transmission and 2000 Ford Contour has manual transmission. 2000 Ford Contour will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1986 Mazda 929 will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 Ford Contour 1986 Mazda 929
Make Ford Mazda
Model Contour 929
Year Released 2000 1986
Engine Position Front Front
Engine Size 1989 cc 2953 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 128 HP 190 HP
Engine RPM 5500 RPM 5600 RPM
Torque 180 Nm 259 Nm
Torque RPM 4000 RPM 4500 RPM
Engine Bore Size 84.8 mm 90 mm
Engine Stroke Size 88 mm 77.4 mm
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1248 kg 1625 kg
Vehicle Length 4680 mm 4930 mm
Vehicle Width 1760 mm 1730 mm
Vehicle Height 1380 mm 1390 mm
Wheelbase Size 2710 mm 2720 mm