2000 Honda Logo vs. 2010 Honda Fit

To start off, 2010 Honda Fit is newer by 10 year(s). Which means there will be less support and parts availability for 2000 Honda Logo. In addition, the cost of maintenance, including insurance, on 2000 Honda Logo would be higher. At 1,500 cc (4 cylinders), 2010 Honda Fit is equipped with a bigger engine. In terms of performance, 2010 Honda Fit (117 HP @ 6600 RPM) has 53 more horse power than 2000 Honda Logo. (64 HP @ 5000 RPM) In normal driving conditions, 2010 Honda Fit should accelerate faster than 2000 Honda Logo. With that said, vehicle weight also plays an important factor in acceleration. 2010 Honda Fit weights approximately 189 kg more than 2000 Honda Logo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Honda Fit (144 Nm @ 4800 RPM) has 36 more torque (in Nm) than 2000 Honda Logo. (108 Nm @ 2500 RPM). This means 2010 Honda Fit will have an easier job in driving up hills or pulling heavy equipment than 2000 Honda Logo.

Compare all specifications:

2000 Honda Logo 2010 Honda Fit
Make Honda Honda
Model Logo Fit
Year Released 2000 2010
Engine Position Front Front
Engine Size 1343 cc 1500 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 64 HP 117 HP
Engine RPM 5000 RPM 6600 RPM
Torque 108 Nm 144 Nm
Torque RPM 2500 RPM 4800 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 940 kg 1129 kg
Vehicle Length 3790 mm 4105 mm
Vehicle Width 1650 mm 1694 mm
Vehicle Height 1530 mm 1524 mm
Wheelbase Size 2370 mm 2499 mm