2000 Kia Pride Wagon vs. 2011 Toyota Sequoia
To start off, 2011 Toyota Sequoia is newer by 11 year(s). Which means there will be less support and parts availability for 2000 Kia Pride Wagon. In addition, the cost of maintenance, including insurance, on 2000 Kia Pride Wagon would be higher. At 4,600 cc (8 cylinders), 2011 Toyota Sequoia is equipped with a bigger engine. In terms of performance, 2011 Toyota Sequoia (310 HP @ 5400 RPM) has 247 more horse power than 2000 Kia Pride Wagon. (63 HP @ 5500 RPM) In normal driving conditions, 2011 Toyota Sequoia should accelerate faster than 2000 Kia Pride Wagon. With that said, vehicle weight also plays an important factor in acceleration. 2011 Toyota Sequoia weights approximately 1756 kg more than 2000 Kia Pride Wagon. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2011 Toyota Sequoia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2011 Toyota Sequoia. However, in wet, icy, snow, or gravel driving conditions, 2000 Kia Pride Wagon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Toyota Sequoia (443 Nm @ 3400 RPM) has 308 more torque (in Nm) than 2000 Kia Pride Wagon. (135 Nm @ 3000 RPM). This means 2011 Toyota Sequoia will have an easier job in driving up hills or pulling heavy equipment than 2000 Kia Pride Wagon. 2011 Toyota Sequoia has automatic transmission and 2000 Kia Pride Wagon has manual transmission. 2000 Kia Pride Wagon will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Toyota Sequoia will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Kia Pride Wagon | 2011 Toyota Sequoia | |
Make | Kia | Toyota |
Model | Pride Wagon | Sequoia |
Year Released | 2000 | 2011 |
Engine Position | Front | Front |
Engine Size | 1324 cc | 4600 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 63 HP | 310 HP |
Engine RPM | 5500 RPM | 5400 RPM |
Torque | 135 Nm | 443 Nm |
Torque RPM | 3000 RPM | 3400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 820 kg | 2576 kg |
Vehicle Length | 3930 mm | 5210 mm |
Vehicle Width | 1610 mm | 2029 mm |
Vehicle Height | 1470 mm | 1956 mm |
Wheelbase Size | 2350 mm | 3099 mm |